EveryDrop by Whirlpool Refrigerator Water Filter 4 (Pack of 1, Packaging may vary)
Every Drop Ice & Water Refrigerator Filter 4. Reduces 23 contaminants including lead, mercury, asbestos, and industrial chemicals. Each filter provides 300 gallons of filtered water and should be changed every 6 months or 300 gallons to ensure proper contaminant removal and flow rate. NSF certified. Product Features EveryDrop Filter 4 is the only filter
Every Drop Ice & Water Refrigerator Filter 4. Reduces 23 contaminants including lead, mercury, asbestos, and industrial chemicals. Each filter provides 300 gallons of filtered water and should be changed every 6 months or 300 gallons to ensure proper contaminant removal and flow rate. NSF certified.
Product Features
- EveryDrop Filter 4 is the only filter Certified by Whirlpool Corporation to work with your Whirlpool, Maytag, KitchenAid, JennAir, and Amana refrigerator.
- NSF Certified to Reduce the Most Contaminants. Reduces 23 contaminants, including pharmaceuticals, waterborne parasites, lead, mercury, and pesticides
- Replaces model numbers UKF8001 & 4396395. Note-do not use a piercing type or 0.19 inch saddle valve, which reduces water flow and can clog more easily
- Used in bottom freezer and side-by-side refrigerators which accept Filter 4
- Replace filter every 6 months or 200 gallons to maximize contaminant reduction
- NOTE: Refer the Manual before use.
- It is a single item of Water Filter 4 (Pack of 1, Packaging may vary)
Best UKF8001 Replacement, By Far The OEM filters are pricey, but to me they’re worth every penny. I have looked all around for any other alternative that is rated as highly as these for contaminant reduction and there are none. I cannot find a single filter that replaces UKF8001 that is both NSF/ANSI 42 and NSF/ANSI 53, let alone NSF/ANSI 401 as well! All the cheaper, non-OEM filters that I have seen are NSF 42 only, if certified at all. I don’t see the point in wasting money on a cheap filter that may not actually be…
Worth the premium price The flow rate on this filter (0.8gpm) is so much better than the generic replacement I had bought while trying to save money (0.5gpm,) that it’s easily worth the premium price (and this Amazon price is better than I found anywhere else.) I had a store brand filter from T H*ME D**OT in my Maytag french door refrigerator. You can see in my attached photo the difference in design: This filter, on the right, is larger, and has more holes for the water to flow. The family complained that it took…
I believe on the filters it’s not pushing the valves in far enough to allow a good water flow I went through 2 of these filters now. the result SLOW FLOW!!! i believe i found the cause to the problem. If you would happen to look at your bypass cap that comes with the fridge and the filter and see the 2 parts that are raised inside the cap. The cap is raised higher than on the filter which would allow it to push the flow valve in further causing more water to flow. I believe on the filters it’s not pushing the valves in far enough to allow a good water flow. the plastic mold isn’t…